mem upgrade

[Sean]

The bios will have the beepcodes, ami or phoenix or whatever they are
nowadays all have the same beep codes. 

however i think you either have the wrong ram or you dont have the jumpers
set right..

do you have the correct voltage set? for the ram and sometimes you need to
set a jumper that set its to either dimms or simms. 

you may have it set to use dimms, therefore its not seeing any ram at all.

Sean



On Mon, 3 Jul 2000, Marcel Kunath wrote:

> >
> > Marcel Kunath wrote:
> >
> > > I had ordered 4 simms of 64 meg edo ram. The ram was for pentium/586
> > > motherboards only.
> >
> > What does this mean exactly?  I would guess the mem chips don't
> > care about the arch of the motherboard as long as the motherboard
> > knows the right voltage and etc. for any SIMM chip(s).
> >
> > Have you tried any other SIMM chips other than the 64-meggers?
> 
> No, I have none laying around. Unfortunately.
> 
> _______________________________________________
> linux-user mailing list
> linux-user@egr.msu.edu
> http://www.egr.msu.edu/mailman/listinfo/linux-user
>