[GLLUG] IPSEC VPN

[yeti]

I did get this working, it was fairly obvious.
I added a rout to IPCop A, then I created a second IPSEC tunnel
connecting the 192.168.1.x subnet and the 10.1.1.y subnet.
 
Thanx again
Jeremy


________________________________

From: CRAA_Admin [mailto:CRAA_Admin at craa.com] 
Sent: Saturday, November 19, 2005 10:41 PM
To: yeti; linux-user at egr.msu.edu
Subject: RE: [GLLUG] IPSEC VPN



You can do this multiple ways I'll mention two.

1) You need the default gateway/router in the 172.16.32 network to know
about 10.1.1 and 192.168.1; everyone can point to this as their default
gateway and not have to know exactly where 10.1.1 or 192.168.1 network
is.  Only the gateway/router has to know.

2) The Cisco router's default gateway upstream must be the "A"(marked in
the diagram) or the cisco router must have a route statement to get back
out A.

Hope this helps.

-H


-----Original Message-----
From: linux-user-bounces at egr.msu.edu on behalf of yeti
Sent: Fri 11/18/2005 1:58 PM
To: linux-user at egr.msu.edu
Subject: [GLLUG] IPSEC VPN

Here is my setup

_________________                       ------------------
|  IPCop         |                      |                |
|  172.16.32.5   |/                   \ |   IPCOP        |
|                |A-----IPSEC VPN------B|   10.1.1.1     |
|_______________ |\                   / |----------------|
        |
          |
       \|/
|---------------|
|               |
|  Cisco router |
|  192.168.1.25 |
|---------------|
       |
       |
      \|/
|---------------|
|   hp printer  |
|  192.168.1.26 |
|---------------|

172.16.32.5 can talk to 10.1.1.1
10.1.1.1 can talk to 172.16.32.5

192.168.1.25 can talk to 172.16.32.5
172.16.32.5 can talk to 192.168.1.25
172.168.32.5 can print to 192.168.1.26

I need users on the 10.1.1.1 network to be able to print to the
HPPrinter (192.168.1.26)
I have tried adding a route to the 10.1.1.1 IpCop, but no luck.  Any
ideas or suggestions?

Thanks

_______________________________________________
linux-user mailing list
linux-user at egr.msu.edu
http://mailman.egr.msu.edu/mailman/listinfo/linux-user



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.egr.msu.edu/mailman-archives/linux-user/attachments/20051121/4ba342ae/attachment.html