[GLLUG] Problem with print server

[Sean O'Malley]

try
http://support.dlink.com/faq/view.asp?prod_id=1879
(Using a paper clip, press and hold the Reset button for about 5 seconds
and then release, After the print server reboots it will be reset to the
factory default settings.) Not sure if you have to unplug it or whether
just hitting the reset button resets it.

your computer will need to be on the 192.168.0.x network in order to
access it. It is explained in the quick install manual previously pointed
out by Chick.



On Sun, 30 Sep 2007, Chick Tower wrote:

> Did you find this page?  It seems to be your best bet.
>
> http://www.dlink.com/products/support.asp?pid=166&sec=0#quickInstallGuides
>
> I tried accessing the d-link FAQ, but it kept giving me the run-around,
> cycling back to the country selection page.
>
>                                 Chick
>
>
> John Lewis wrote:
> > I bought a d-link dp-300u print server off ebay and am having a bit of a
> > problem with it. Seems the previous user set it with an ip address and I
> > don't know what it is. It isn't in the range of either my Linksys or d-link
> > routers (192.168.<0or1>.xxx), is there any software that could discover its'
> > ip?
> >
> > John
>
>
> _______________________________________________
> linux-user mailing list
> linux-user at egr.msu.edu
> http://mailman.egr.msu.edu/mailman/listinfo/linux-user
>