eth0 ???
Don Chorman
damedged@home.com
Fri, 22 Dec 2000 01:32:54 -0500
This is a multi-part message in MIME format.
------=_NextPart_000_002C_01C06BB7.1B1322C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Sean,
I did the dmsg command, and I see eth0 and eth1. I am concerned, because =
I didn't load the modules that came with the driver disk. I followed the =
directions on how to copy and compile them, but those directions were =
for turbolinux and they didn't compile (no tulip.o).
Anyway, I used the network config thingy (I don't know the name yet) =
and selected a card that used the tulip driver. There were 2 cards =
listed, one said "old tulip", so I chose the one that used the "tulip". =
I hope this works. I'd be a little bent if the NICS I bought didn't work =
because it said linux on the packaging. If the driver doesn't work, then =
I will probably have to figure out how to get the syslink modules to =
compile. I feel lost. =20
I think I am going to hook up my cable modem Friday night, and see if I =
can connect. If that works, then I'll move on to sharing the connection =
with this windows machine.=20
Thanks,
Don
------=_NextPart_000_002C_01C06BB7.1B1322C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4522.1800" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Sean,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I did the dmsg command, and I see eth0 =
and eth1. I=20
am concerned, because I didn't load the modules that came with the =
driver=20
disk. I followed the directions on how to copy and =
compile them,=20
but those directions were for turbolinux and they didn't compile (no=20
tulip.o).</FONT></DIV>
<DIV><FONT face=3DArial size=3D2> Anyway, I used the =
network config=20
thingy (I don't know the name yet) and selected a card that used =
the tulip=20
driver. There were 2 cards listed, one said "old tulip", so I chose =
the one=20
that used the "tulip". I hope this works. I'd be a little bent if the=20
NICS I bought didn't work because it said linux on the =
packaging. If=20
the driver doesn't work, then I will probably have to figure out how to =
get the=20
syslink modules to compile. I feel lost. =20
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2> I think I am going to hook up my =
cable modem=20
Friday night, and see if I can connect. If that works, then I'll move on =
to=20
sharing the connection with this windows machine. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Thanks,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Don</FONT></DIV></BODY></HTML>
------=_NextPart_000_002C_01C06BB7.1B1322C0--