hp
Paul Melson
melson@scnc.holt.k12.mi.us
Wed, 26 Jul 2000 07:35:48 -0400
On Tue, Jul 25, 2000 at 11:32:15PM -0400, Marcel Kunath wrote:
> hp sucks. sorry.
>
> so i downloaded hp jetadmin. installed smoothly. doesn't detect a thing. I got
> the printer plugged into the same hub the machine is plugged in the jetadmin
> runs on. the machine is a 192.168.1.x subnet.
>
> i searched for any devices and i searched for specific Ip or jetdirect type
> or hw address. nothing.
Under JetAdmin 3.x you must go to the 'Device'
menu and select 'New...' That's the only way
to get control of an unconfigured device.
If it's a used printer or JetDirect, then it
may be that its existing network configuration
is preventing it from communicating properly.
They're tempermental as all hell, and a bad
gateway or subnet mask will prevent them from
communicating with anything even if it's in
the same broadcast domain. If you can perform
a factory reset on the JetDirect, do so, and
start from scratch with JetAdmin. If you're
having trouble, post the model number and I'll
dig through my manuals - I have most of them
from the past decade. :-\
PaulM
--
_____________________
melson@holt.k12.mi.us