ISA NE2000 under Redhat 6.1

[Sean]

I thought irq 10 was usually taken by plug n play normally. You might want
to try a different IRQ, or at least 2x check and make sure irq 10 isnt
being used. 

*tosses his 2 cents in*

On Mon, 6 Mar 2000, Benjamin Minshall wrote:

> 
> Greetings:
> 
> Running Redhat 6.1, I can't get an old ISA NE2000 to work.  The card
> is jumpered to IO=300, IRQ=10.  I've used linuxconf to specify my module
> 
> to ne.o with the parameters io=0x300 and irq=10.  When linuxconf updates
> 
> my changes, the module reports "ne.c: No PCI cards found.  Use
> "io=0xNNN"
> value(s) for ISA cards."  Is there something I'm doing wrong?
> 
> -Ben
> 
> --
> -------------------
> 
> Benjamin Minshall
> minshal1@pilot.msu.edu
> 
> 
> 
> _______________________________________________
> linux-user mailing list
> linux-user@egr.msu.edu
> http://www.egr.msu.edu/mailman/listinfo/linux-user
>